XBee-PRO (S2B) 63mw Wireless Communication Module (Wire antenna)

Description

Brand new.  Sold as is.
Introduction:
XBee ZB PRO(a.k.a. Series 2) module improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. Series 2 modules allow you to create complex mesh networks. this module has the lowest current draw of any Digi RF product. However, the infrastructure of a ZigBee network is more complex and requires more configuration to fully impliment. This module can give range of 90 meters indoor or 3200meters outdoor. This XBee wireless device can be directly connected to the serial port (at 3.3V level) of your microcontroller. By using a logic level translator it can also be interfaced to 5V logic (TTL) devices having serial interface. This module supports data rates of up to 250kbps. They are designed for high-throughput(35kbps) applications requiring low latency and predictable communication timing. Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.
Specifications:
Model code: XB24-BZ7WIT-004
Operating Frequency: ISM 2.4 GHz
Antenna type: Wire antenna
Indoor/Urban Range up to 300 ft. (90 m)
Outdoor RF line-of-sight Range up to 2miles (3200 m)
Interface: Serial(UART) at 1200 - 1 Mbps
Supply Voltage: 2.7 – 3.6V
Transmit Current 205mA (@ 3.3 V)
Receive Current 47mA (@ 3.3 V)
Dimensions: 0.960” x 1.297” (2.438cm x 3.294cm)
Operating Temperature: -40 to 85º C (industrial)
Features:
Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
Number of Channels: (software selectable) 14 Direct Sequence Channels
Addressing Options: PAN ID and Addresses,Cluster IDs
No. of Channels: 11 to 25
AT and API Command Modes for configuring module parameters
8 Digital IO pins
Fully FCC certified
Transmit Power: 63 mw(+18 dBm)
Receiver Sensitivity: -102 dBm
RoHS: Compliant