-40%
Nordic nRF52840 Dongle MDBT50Q-RX DevKit (Semi Knock Down/No Bootloader) FCC IC
$ 5.54
- Description
- Size Guide
Description
Raytac’
s MDBT50
Q
-
RX
is a
BT 5
.
1 and BT
5.2
stack (Bluetooth low energy or BLE)
dongle
designed based on
Nordic nRF52840
SoC solution
, which incorporates:
GPIO
,
PWM
and
USB
interfaces for connecting peripherals and sensors.
The compact size
(L)
4
3.1
x (W)
1
8
x (H)
9.3
mm
provides developers flexibility to meet most IoT Application Demanding, Connectivity Range Requirement, BOM Cost Saving, Designs Simplifying, and Time-TO-Market Efficiency.
nRF52840 SoC Raytac Dongle Parts (Semi Knock Down)
No Bootloader Pre-Loaded
BT5.2, FCC/IC/CE/Telec/KC/SRRC/NCC/RCM/WPC Pre-certified
Not plug & play but need hardware connection for firmware loading before used it
Hardware Setting: Find " Burn your firmware - onto MDBT50Q-RX, that is."
Firmware Upload: Find " Firmware Coding & DFU onto MDBT50Q-RX"
About The Dongle:
‧Bluetooth 5, IEEE 802.15.4, 2.4 GHz transceiver
‧-95dBm sensitivity in 1Mbps Bluetooth low energy (BLE) mode
‧-103dBm sensitivity in 125Kbps BLE mode (long range)
‧+8 dBm TX power (down to -20 dBm in 4 dB steps)
‧On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
‧Programmable output power from +8dBm to -20dB
‧RSSI (1dB resolution)
‧Supported data rates:
‧Bluetooth 5: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps
‧IEEE 802.15.4-2006: 250 kbps
‧Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
‧ARM Cortex –M4 32-bit processor with FPU, 64 MHz
‧Memory: 1MB flash / 256KB RAM‧HW accelerated security
‧ARM TrustZone Cryptocell 310 cryptographic accelerator
‧128 bit AES / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
‧Advanced on-chip interfaces
‧USB 2.0 full speed (12Mbps) controller
‧QSPI 32MHz interface
‧High speed 32MHz SPI
‧Type 2 near field communication (NFC-A) tag with wake-on field
‧Programmable peripheral interconnect (PPI)
‧48 general purpose I/O pins (GPIO)
‧EasyDMA automated data transfer without CPU processing on peripherals
‧12 bit, 200ksps ADC – 8 configurable channels with programmable gain
‧4 x 4 channel pulse width modulator (PWM)units with EasyDMA
‧Audio peripherals : I2S, digital microphone interface (PDM)
‧5 X 32-bit timers with counter mode
‧Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
‧Up to 2 x I2C compatible 2-wire masters / slaves
‧2 x UART(CTS/RTS) with EasyDMA
‧Quadrature decoder (QDEC)
‧3 x 24-bit real-time counters (RTC)
‧Flexible power management
‧Supply voltage range 1.7V to 5.5V
‧Built in DC/DC converter for direct USB/Li-On power
‧On-chip DC/DC and LDO regulators with automated low current modes
‧Regulated supply for external components from 1.8V to 3.3V
‧Automated peripheral power management
‧Fast wake-up using 64MHz internal oscillator
‧0.4uA at 3V in OFF mode, no RAM retention
‧1.5uA at 3V in ON mode, no RAM retention, wake on RTC
‧ Nordic SoftDevice ready and with support for concurrent multi-protocol
‧ TX Power: 0dBm @ 5.3mA, +8dBm @ 13.6mA
‧ BLE RX Sensitivity: -96 dBm @ 5.4mA
‧ BLE Coded RX Sensitivity: -103 dBm
‧ Operation Temperature: -40℃ ~ 85℃
‧ Dimensions: 10.5 x 15.5 x 2.0 mm (2.2mm)
‧ Bluetooth 5 Qualified and Thread Compliant
‧ RF Certification Grant
‧FCC (USA)
‧IC (Canada)
‧MIC (Telec Japan)
‧KC (Korea)
‧SRRC (China)
‧NCC (Taiwan)
‧CE (Europe)
‧RCM (Australia / New Zealand)
‧WPC (India)
Nordic Solution Bluetooth Module Shipping Policy:
All items are brand new,
unused, unopened, undamaged item in its original packaging, such as an unprinted box or plastic bag. (where packaging is applicable).
Usually Ships Within 3 days!
Shipment dates excludes importing custom clearance!
Package may have been opened by custom's checking!
Import duties, custom taxes and charge are customer's responsibility!
*Terms will subject to change without prior notice!