Nordic nRF52833 Module MDBT50Q Chip Antenna Bluetooth Thread Zigbee FCC IC CE

Description

Raytac
’
s MDBT50Q & MDBT50Q-P is a BT 5.2 stack (Bluetooth low energy or BLE) module designed based on
Nordic nRF52833 SoC solution
, which incorporates:
GPIO
,
SPI
,
UART
,
I2C
,
I2S, PMD, PWM, ADC
,
NFC
and
USB
interfaces for connecting peripherals and sensors, p
rovides developers flexibility to meet most IoT Application Demanding, Connectivity Range Requirement, BOM Cost Saving, Designs Simplifying, and Time-TO-Market Efficiency.
Features:
Embedded 2.4GHz transceiver supports Bluetooth
5.2 (
), IEEE 802.15.4
( & Zigbee) & 2.4Ghz RF & ANT
+
upon customer’s preference.
42 GPIO
Compact size with
(L) 15.5 x (W) 10.5 x (H) 2.05 mm
Low power requirements, ultra-low peak, average and idle mode power consumption.
Be compatible with a large installed base of mobile phones, tablets and computers.
Fully coverage of BLE software stack.
BLE & RF transmission switching helps products fit all operation system and most
hardware.
Certification:
Bluetooth: BT5.2 & BT5.1 & BT5
Regulation: FCC/IC/CE/Telec/KC/SRRC/NCC/RCM/WPC
Antenna Type: Chip Antenna
About The Module:
‧
Bluetooth 5.2, IEEE 802.15.4, 2.4 GHz transceiver
‧
-96 dBm sensitivity in 1 Mbps Bluetooth low energy (BLE) mode
‧
-103 dBm sensitivity in 125 Kbps BLE mode (long range)
‧
+8 dBm TX power (down to -20 dBm in 4 dB steps)
‧
On-air compatible with nRF52, nRF51, nRF24L and nRF24AP Series
‧
Programmable output power from +8dBm to -20dB
‧
RSSI (1 dB resolution)
‧
Supported data rates:
‧
Bluetooth 5.1: 2 Mbps, 1 Mbps, 500 kbps, 125 kbps
‧
IEEE 802.15.4-2006: 250 kbps
‧
Proprietary 2.4 GHz: 2 Mbps, 1 Mbps
‧
Angle-of-arrival (AoA) and angle-of-departure (AoD) direction finding using Bluetooth® .
‧
ARM Cortex
–
M4 32-bit processor with FPU, 64 MHz
‧
Memory: 512KB flash / 128KB RAM
‧
HW accelerated security
‧
128 bit AES / ECB / CCM / AAR co-processor (on-the-fly packet encryption)
‧
Advanced on-chip interfaces
‧
USB 2.0 full speed (12 Mbps) controller
‧
High speed 32MHz SPI
‧
Type 2 near field communication (NFC-A) tag with wake-on field, touch-to-pair support
‧
Programmable peripheral interconnect (PPI)
‧
42 general purpose I/O pins
‧
EasyDMA automated data transfer between memory and peripherals.
‧
12 bit, 200 ksps ADC
–
8 configurable channels with programmable gain
‧
4 x 4 channel pulse width modulator (PWM) units with EasyDMA
‧
Audio peripherals : I2S, digital microphone interface (PDM)
‧
5 X 32-bit timers with counter mode
‧
Up to 4 x SPI masters / 3 x SPI slaves with EasyDMA
‧
Up to 2 x I2C compatible 2-wire master / slave
‧
2 x UART(CTS/RTS) with EasyDMA
‧
Quadrature decoder (QDEC)
‧
3 x 24-bit real-time counters (RTC)
‧
Flexible power management
‧
Supply voltage range 1.7V to 5.5V
‧
On-chip DC/DC and LDO regulators with automated low current modes
‧
Automated peripheral power management
‧
Fast wake-up using 64MHz internal oscillator
‧
0.4uA at 3V in System OFF mode, no RAM retention
‧
1.5uA at 3V in System ON mode, no RAM retention, wake on RTC
‧
Nordic SoftDevice ready with support for concurrent multi-protocol
‧
Operating temperature from -40 to 105 °C
Nordic Solution Bluetooth Module Shipping Policy:
All items are brand new,
unused, unopened, undamaged item in its original packaging, such as an unprinted box or plastic bag. (where packaging is applicable).
Usually Ships Within 3 days!
Shipment dates excludes importing custom clearance!
Package may have been opened by custom's checking!
Import duties, custom taxes and charge are customer's responsibility!
*Terms will subject to change without prior notice!