-40%
Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L
Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L
Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L
Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L
Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L

Laminate 4-In-1 Molding 0.75 In. T X 2.37 In. W X 78.7 In. L

$ 22.81

Availability: 20 in stock
  • Flooring Look: Wood Look
  • Laminate Flooring Features: Easy Install,Floating,No waxing or polishing needed,Scratch resis
  • Product Width (in): 2.37 in
  • Color/Finish: Blonde
  • Color Family: Orange
  • Indoor/Outdoor: Indoor
  • Width (in) x Length (in): 2.37in x 78.75 in
  • Water Protection: No Water Protection
  • Material: Laminate
  • Returnable: 90-Day
  • Flooring Product Type: Laminate Moulding/Trim
  • EAN: 07445000122148
  • UPC: 7445000122148
  • Gloss: Low Gloss
  • Product Thickness (in): 0.75 in
  • Product Length (in): 78.75 in
  • Certifications and Listings: CARB Compliant
  • Manufacturer Warranty: Limited Lifetime
  • Location: Basement,Bathroom,Kitchen,Mudroom,Sunroom
  • Finish Type: Textured
  • Condition: New
  • Installation Method: Screw Down

    Description

    Finish your flooring installation with coordinated molding
    Four molding needs in one solution for laminate wood floors
    Covers the length of two standard doorways
    4-in-1 multifunctional molding provides everything you need to complete your laminate flooring installation in 1 single kit. This innovation allows assembly of 4 different transition types from a single product, saving you time and money. That means you can be sure you'll always have the right piece when you start your installation. Use in doorways or join 2 sections of hard surface flooring with an equal height with the T-molding. Use the reducer to transition from laminate to tile, vinyl or hard surfaces of a different height. The end-molding configuration allows you to transition to carpet or to finish your laminate flooring installation at sliding doors, fireplaces or other fixed edges. For best results, try laying out your moldings in the area where they will be installed before installing flooring planks. That way you can choose the plank that meets the transition to best fit your desired look. Coordinating Stair Nose and wall transitions are available to complete the finished look.
    Performance Accessories 4-in-1 Laminate Floor Molding
    All moldings in kit are 6-1/2 ft. in length
    T-mold and carpet reducer measure 1.75 in. wide
    Hard surface reducer measures 2 in. wide
    4-in-1 molding matches a variety of laminate flooring options available in store and online
    Can be used with flooring up to 15mm thick
    Design includes t-molding, carpet transition, hard surface reducer and end molding
    T-molding joins 2 hard surfaces of similar heights
    Carpet transition joins hard surface to carpeted surface
    Hard surface reducer joins 2 hard surfaces of differing heights
    End molding provides a solution at fixed edges
    No painting or staining necessary
    Appropriate Grade for Installation: Below Grade, On Grade and Above Grade
    Can be installed over smooth, flat, dry surfaces: concrete, ceramic tile, vinyl and wood
    Residential use only