Digital and Analog Design Laboratory with Breadboard

Description

Digital/Analog Design Lab
A digital/analog design lab with all the basic components needed to design and test circuits. Features a breadboard with 2,712 interconnected tie points, fits all DIP sizes and components with AWG 22-30 solid leads, fixed +5VDC @ 500mA built-in power supply, and a built-in function generator with frequency ranges of 1Hz to 100kHz that can produce sine/square/triangle waves.
Solderless Breadboard
2712 interconnected nickel-plated tie points, fitting all DIP sizes and all components with AWG #22-30 (0.3mm-0.8mm) solid leads
DC Power Supply
Fixed outputs: +5V @ 1A and -5V @ 300mA
Variable outputs: 0V to ±15V @ 500mA
Function Generator (6 Ranges)
Frequency ranges: 0.1Hz to 2Hz, 1Hz to 20Hz, 10Hz to 200Hz, 100Hz to 2kHz, 1kHz to 20kHz, 100kHz to 200kHz
Sine and triangle wave output: 0-5 Vpp variable
Square wave output: 0 to 15 Vpp variable
TTL mode output: +5V ± 10%
Universal Counter
Frequency range: 1Hz to 99.999MHz; 10Hz to 100MHz
8-digital 7-segment LED display
Counter switch: External/internal
Other Features:
Built-in 2.5" diameter 8Ω, 25W speaker
2 pulse switches
Two 7-segment LED displays
2 variable resistors with a value of 1kΩ and 100kΩ
8-bit red LEDs with separate input terminals
8 data switches
2 banana sockets
2 BNC jacks
Input voltage: 110VAC/220VAC @ 50-60Hz (switchable, 115 selected as factory default)
IEC-C14 AC inlet
Size: 12.8"W x 9.8"D x 3.7"H
Weight: 8.5 lbs.
Includes:
AC power cord (3-conductor), user's manual, UC-03 60-pin straight header