Add-on: Prototype Board with iMOD Port, for SBC66

Description

Add-on: Prototype Board with iMOD Port, for SBC66
PT66ECI
Prototype board with iMOD socket, fully assembled.
This is an assembled prototyping board for the Netcruzer
SBC66
line of Single-Board Computers. The SBC66 mounts onto it via the daughterboard connector on the SBC66. (SBC66 board is not included.) All port pins of the SBC66 board are marked clearly on the prototyping area. This board also has a port for adding one
iMod Module
(of 0.7" or
0.9" width).
The picture below shows this board with an SBC66EC and the RS485 iMOD module plugged into it.
As well as a Reset button, there is a Firmware button that can be used to put the SBC66 into Bootloader mode. An enclosure option will be available soon.
Download PT66ECI User Manual and Schematics
Download PT66ECI schematics and PCB layout files for Eagle
Enclosure Option
It is necessary to have an SBC66 mainboard connected to this board, then together they can fit optionally into a modified RM2015S enclosure, called ENC2015S-NZ.
If you would like to create such a self-contained system, we have a single order page from which you can
purchase this board with an enclosure
.